Part Number Hot Search : 
70TR160 BUL642D2 X93003 TC114Y L60S80 TS2026L LT3494 44701
Product Description
Full Text Search
 

To Download IP1522 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  - 1 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator the IP1522 is a dual output voltage series regulator which can provide up to 500ma of output current. the IP1522 consists of 1 - fixed 3.3v and 1 - fixed 1.65v regulators. - 1 - fixed 3.3v regulator with internal npn tr. - 1 - fixed 1.65v regulator with internal npn tr. - built - in tsd circuit. - built - in current limit circuit. - built - in on/off control circuit. - built - in over voltage protection circuit. - output trimm ed to +/ - 3% tolerance d escription f eatures device package operating temp IP1522 14soph - 8l - 35 o c ~ +85 o c ordering information 14soph - 8l block diagram vout2 vin vout1 on/off pgnd n/c 1 2 6 4 5 3 n/c 7 pgnd vref on/off control sw tsd ovp ocp n/c shut down
- 2 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator pin descriptions no symbol i/o description 1 vin i input supply voltage 2 vout1 o reg +3.3v output 3 vout2 o reg +1.65v output 4 on/off i on/off control 5 n/c - no connection 6 n/c - no connection 7 n/c - no connection 8 pgnd - power ground pin connections vout2 vin vout1 on/off pgnd n/c n/c pgnd n/c 1 2 6 4 5 3 7 IP1522
- 3 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator characteristics symbol value unit maximum supply voltage vinmax 10 v on/off voltage vonoff 10 v power dissipation pd 3.5* w operating temperature topr - 35 ~ +85 o c storage temperature tstr - 55 ~ +150 o c note> 1. when mounted on 100mm x 100mm x 1mm pcb (phenolic resin material). 2. power dissipation reduces 28mw/ o c for using ab ove ta=25 o c 3. do not exceed pd and soa. power dissipation curve power dissipation (w) ambient temperature ( c ) 25 50 75 100 125 150 175 0 1 2 3 recommended operating conditions characteristics symbol value unit supply voltage vcc 4.5 ~ 6.0 v input voltage vin 4.5 ~ 6.0 v soa absolute maximum ratings(ta=25 o c) 4
- 4 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator electrical characteristics characteristics symbol condition min. typ. max. units quiescent current icc vcc=5.25v, no - load - 7 11 ma ovp detecting vol t age vovp vcc=variable 6.5 - - v 3.3v regulator part output voltage vout1 io=10ma 3.2 3.3 3.4 v line regulation dvline1 vin=4.5~6v, io=10ma - 0.035 0.2 % load regulation dvload 1 vin=5.25v, 10ma < io < 500ma - 0.4 0.8 % dropout voltage vdrop1 io=500ma - 1.1 1.3 v ripple rejection rr1 f=120hz, co=10uf tantalum (vin - vout)=3v, io=200ma 60 70 - db current limit *note ilimit1 vin - vout=2.5v 550 750 - ma temperature stability temp1 - - 0.5 - % output noise voltage 1 vn1 io=300ma - 100 - uv 1.65v regulator part output voltage vout2 io=10ma 1.6 1.65 1.7 v line regulation dvline2 vin=4.5~6v, io=10ma - 0.035 0.2 % load regulation dvload2 vin=5.25v, 10ma < io < 100ma - 0.4 0.8 % dropout voltage vdrop2 io=100ma - 2.5 2.8 v ripple rejection rr2 f=120hz, co=10uf tantalum (vin - vout)=3v, io=50ma 60 70 - db current limit *note ilimit2 vin - vout=4v 120 - - ma temperature stability temp2 - - 0.5 - % output noise voltage 2 vn2 io=60ma - 100 - uv ( vin= 5.25v, co=10uf, ta = 25 o c, unless otherwise specified.)
- 5 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator electrical characteristics (continued) on/off control part on voltage von vout=enabled - - 0.8 v off voltage voff vout=disabled 2.0 - - v ( vin= 5.25v, co=10uf, ta = 25 o c, unless otherwise specified.) * note don?t exceed following current limit. ( iout1 : 550 ma, iout2 : 120 ma )
- 6 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator application summary - on / off when you want to control output of the IP1522, use pin #4 as follows pin#4 IP1522 high off low on on/off function as shown in figure pin#4 is positive input of the comparator, and the other input is threshold voltage. if the voltage of the pin#4 rises above threshold voltage, then tr q1 will be saturated and the main bias current will be shut down. pin#4 vth main bias q1
- 7 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator typical application circuit vinput 1.65v 10uf 10uf 3.3v vout2 vin vout1 on/off pgnd n/c n/c pgnd n/c 1 2 6 4 5 3 7 IP1522 von/off h l
- 8 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator internal circuit pin no pin name internal circuit 2 regulator output1 3 regulator output2 3 2
- 9 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator pin no pin name internal circuit 4 on / off 4 internal circuit (continued)
- 10 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator electrical characteristics curves -50 0 50 100 150 1.630 1.635 1.640 1.645 1.650 1.655 1.660 1.665 1.670 vref temperture stability vref (v) temp ( o c) 0 2 4 6 8 10 0 2 4 6 8 10 vcc (v) icc (ma) vcc vs icc
- 11 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator 0 100 200 300 400 500 600 700 800 0.6 0.8 1.0 1.2 1.4 iload1 vs vdrop1 dropout voltage1 (v) output current1 (ma) 0 20 40 60 80 100 120 140 1.2 1.4 1.6 1.8 2.0 2.2 iload2 vs vdrop2 dropout voltage2 (v) output current2 (ma)
- 12 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator electrical characteristics curves (continued) 0 200 400 600 800 1000 1200 3.20 3.25 3.30 3.35 3.40 vout1 load regulation (tj=25 o c) output voltage1 (v) output current1 (ma) 0 50 100 150 200 250 1.60 1.62 1.64 1.66 1.68 vout2 load regulation (tj=25 o c) output voltage2 (v) output current2 (ma)
- 13 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator electrical characteristics curves (continued) 0 20 40 60 80 100 -300 -200 -100 0 100 200 io=50ma io=50ma io=450ma vout1 load transient response output voltage deviation (mv) time (usec) 0 20 40 60 80 100 -300 -200 -100 0 100 200 io=10ma io=10ma io=100ma vout2 load transient response output voltage deviation (mv) time (usec)
- 14 - august. 2002 (rev.6) www.interpionsemi.com IP1522 dual output voltage series regulator package dimension 14soph - 8l #1 6.00 0.30 (0.236 0.012) 3.95 0.2 (0.156 0.008) 5.72 (0.225) 0.60 0.20 (0.024 0.008) 0.20 +0.10 -0.05 (0.008,+0.004,-0.002) 0~8 0.47 (0.019) 0.406 +0.10 -0.05 (0.008,+0.004,-0.002) 1.27typ (0.050typ) 1.80max (0.071max) min0.05 (min0.002) 1.55 0.10 (0.061 0.004) 2.946 4.216 8.56 0.20 ( 0.347 0.008 ) 8.70max (0.343max)


▲Up To Search▲   

 
Price & Availability of IP1522

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X